Connection Failed my iPhone

I’ve tried all of the following solutions.
I can’t connect to my iPhone… Please your advice.
My environment is windows 10 , Rhino 6 and iPhoneSE(iOS 15.2.1)

Fologram for Mobile connection troubleshooting

and

Device Connection Failing - #3 by kmill

my log is

16:04:35.457 | _INFO | _________________________Fologram.IO.NetworkStatus | Network up. 
16:04:35.457 | _INFO | _________________________Fologram.IO.NetworkStatus | Network is connected. 
16:04:35.743 | DEBUG | ___________Fologram.IO.Rhino3d.UI.NetworkViewModel | Setting selected network to NetworkProperties Adapter=Realtek Gaming GbE Family Controller Status=Up Type=Ethernet Address=[192.168.1.101] HostName=DESKTOP-TAK5PC1 SubnetMask=255.255.255.0 
16:04:35.743 | DEBUG | ___________Fologram.IO.Rhino3d.UI.NetworkViewModel | Setting selected network to NetworkProperties Adapter=Realtek Gaming GbE Family Controller Status=Up Type=Ethernet Address=[192.168.1.101] HostName=DESKTOP-TAK5PC1 SubnetMask=255.255.255.0 
16:04:36.385 | ERROR | ____________Fologram.IO.Rhino3d.Plugin.UpdateCheck | An exception occurred while performing an update check. 
この要求の送信中にエラーが発生しました。
ExecutionContext.Run => ExecutionContext.RunInternal => <PerformUpdateCheck>d__18.MoveNext
16:04:47.620 | DEBUG | ___________Fologram.IO.Rhino3d.UI.NetworkViewModel | Setting selected network to NetworkProperties Adapter=Intel(R) Wi-Fi 6 AX201 160MHz Status=Up Type=Wireless80211 Address=[192.168.10.160] HostName=DESKTOP-TAK5PC1 SubnetMask=255.255.255.0 
16:04:50.633 | DEBUG | ___________________________Fologram.Network.Server | State changed from Closed to Opening 
16:04:50.633 | DEBUG | ___________________________Fologram.Network.Server | Created http server on 0.0.0.0:10090 
16:04:50.642 | ERROR | ___________________________Fologram.Network.Server | WS: The current output action has been changed. 
16:04:50.642 | DEBUG | ___________________________Fologram.Network.Server | Adding websocket service 0.0.0.0:10090/io 
16:04:50.642 | DEBUG | ___________________________Fologram.Network.Server | Started http server on 0.0.0.0:10090 
16:04:50.693 | DEBUG | ___________________________Fologram.Network.Server | State changed from Opening to Open 
16:04:50.693 | _INFO | __________________________________Fologram.IO.Sync | OnOpenNetworkBroadcast 
16:04:50.742 | DEBUG | ______________Fologram.Network.UdpBroadcastManager | Beginning broadcast of 54 bytes at 1000 millis interval 
16:04:50.742 | _INFO | ___________________________Fologram.Network.Server | Server started 
16:04:50.742 | DEBUG | __________________________________Fologram.IO.Sync | Changing session Id from 00000000-0000-0000-0000-000000000000 to a4d7e281-3432-4b7b-bf9a-55ee71d64b5a 
16:04:50.756 | DEBUG | _____________________Fologram.IO.Rhino3d.SyncRhino | Collecting document objects 
16:04:50.771 | DEBUG | ________________Fologram.IO.Rhino3d.UI.QRCodeModel | Generating QR with content: {"ProtVer":"2","DocVer":"1","NetVer":"0","IP":"192.168.10.160","Port":"10090","Session":"0"} 
16:04:50.798 | _INFO | _____________________Fologram.IO.Rhino3d.SyncRhino | Collected 1 objects, 3 layers, 1 materials, 0 textures. Operation took 41 ms.

Hi @fumianzai

Are you able to connect if you create a hotspot on your phone, connect your laptop to this and disable both windows and any third party firewall?

Hi @Gwyll

Thanks your time and your advice.

I was able to view it correctly thanks to your advice.
The cause was the company network.
I connected with HotSpot on my phone and it worked !
Fologram is the best platform we have to extend our fabrication.
We are grateful to you.

best ,
Fumi

1 Like